intex saltwater system

Sorry you cant really hear my voice well. PLEASE NOTE, I AM NOT AN ELECTRICIAN!!! Also be sure to CLEAN out the cell when there is buildup following Intex guidelines AND always test your pool water chemistry to make sure ALL chemicals are balanced correctly (eg chlorine,pH, Alkalinity). I stated on the video that the on/off button should be off, BUT it should be on ONCE the "fan" wires have been moved to the new terminal SEE "VideoFan1", DONT MISS WITH THE "TIMER" BUTTONS, if the machine goes back to "service" mode, just unplug and then replug, but dont use the machines "timer", it will just keep putting it on "service" mode, which will then turn off the fan, you dont want that to happen. Use an external timer (your watch). See other video for rewiring/bypassing the fan wires in order for the fan to stay on, to keep things as cool as possible. PLEASE NOTE: THE PLUG TO THE GENERATOR MUST BE UNPLUGGED FROM THE GFCI OUTLET, NOT JUST TURNED OFF, AFTER using it for the amount of time you need it on, using RECOMMENDED (BY INTEX) TIMES OF CHLORINE GENERATION shown on your manual for your size pool. THE CELL IS DIRECTLY HOOKED TO THE MAIN ELECTRIC OUTLET. IF YOU LEAVE IT HOOKED TO THE GFCI LONGER THAN THE RECOMMENDED TIME, IT WILL CONTINUE TO GENERATE CHLORINE, WHICH MEANS TOO MUCH CHLORINE. Note Please: RESULTS MAY VARY, IF YOU HAVE ANY TROUBLE WITH YOURS AND YOU STILL HAVE THE WARRANTY, YOU MIGHT BE ABLE TO GET ANOTHER ONE FROM INTEX FOR FREE. Then you can Xperiment with your ...